As part of a strategic reorganization of its commercial and operational leadership that was completed earlier this year, the SAMP Group announced that Marcel Baettig was appointed chief executive officer (CEO). He has deep expertise in business strategy, operations, and organizational transformation across global markets, most recently at Humatica AG, where he advised portfolio companies and listed firms on strategic organizational alignment, including SAMP Group. He replaced outgoing CEO Jouni Heinonen, whose assignment as CEO had been planned to be short term, and is now serving in board positions. Two senior executives were also promoted. Giorgio Albertazzi was promoted from sales director EMEA to appointed chief commercial officer (CCO). He has been with the company for more than two decades and was described as being instrumental in growing the company’s presence across the EMEA region. He holds a degree in economics. Matteo Nascetti was promoted from general manager to chief operating officer (COO). He has nearly two decades of experience in machinery and precision engineering, and was said to have had a key role in optimizing production processes and boosting operational performance. Based near Bologna, Italy, the SAMP Group provides equipment for the entire wire and cable production chain, including rod breakdown lines, multi-wire drawing lines, extrusion lines, bunching machines and engineering solutions.

 Neal Hamer as joined the American Wire Group as director of engineering - power equipment, responsible for driving the company’s technical strategy and expanding the in-house engineering capabilities to support the growing power equipment segment. He will assess AWG’s current technical landscape across transformers, switchgear and substation solutions, while aligning supplier specifications with industry standards. He most recently was director, operations electrical engineering, for Invenergy LLC, where he worked in multiple positions for more than 11 years. Prior to that he was a protection engineer for GE Energy for four years. Based in Miami, Florida, American Wire Group manufactures wire, cable and related products for the power utility and renewable energy industries. 

Jack Ritter has joined the Service Wire team as an inside sales representative in the Houston sales office. He will be serving utility markets in the Midwest. He worked for the company while he was getting his B.S. degree in industrial distribution from Texas A&M University. In other Service Wire news, two company employees were selected to tED Magazine’s prestigious “30 Under 35” list. Matt Cardwell, corporate manufacturing engineering manager, joined the company in 2018. In 2019, he was instrumental in the build-out and commissioning of the new Houston plant before returning to West Virginia to take on his current role. He was described as “a strong leader and one of the best engineers in the industry.” Sarah Wotring, who has worked as an inside sales representative for more than three years, was described as “an energetic problem-solver ... (who continually produces) outstanding results.” She has demonstrated a keen ability to manage strong sales relations. Based in Culloden, West Virginia, Service Wire Co., manufactures wire and cable for sectors from industrial to utility, and more. 

Last year, the WAI’s Board of Directors met at Wire Expo to discuss the Association’s future. That focus continued at Interwire 2025, where the board met in a meeting led by Consultant Eric Curtis, Curtis Strategy.

The meeting served as an update and further discussions about the Centennial Plan that was presented to the WAI’s BoD last October. In it, four pillars were identified as crucial: an Education & Training Center; trade shows & conferences; WJI and WAI media platform; and member users/customers. Key beliefs of the mission include that wire drawing and extrusion are specific processes that cannot be serviced by other industry associations; that technology, digital platforms and AI are paramount; and that in-person events will remain important to hybrid workforces.

At the 2025 meeting, held the day before the event started, board members split into three groups that each discussed areas where the WAI should be active as well as the biggest concerns the industry faces. A wide range of topics were discussed, with one of the most important areas being for WAI to firmly establish itself as “the place to go” for technical information. As for concerns, everyone’s list included the loss of industry expertise as more industry veterans retire.

“Our industry, like many others, needs help for securing and keeping reliable employees,” observed WAI President Eric Bieberich. “The WAI has dedicated volunteers who with the help of staff can help create programs that can make a difference. It’s vital that we do so in an effective way, and meetings like this one we just had are essential.”

The Association has already been active in heightening its educational focus through its video-based education courses available for purchase. Last year, the Board voted to fund the initiative, which has been led by WAI Manager of Education John Markowski, who made a presentation on this at Interwire at the WAI Theater. He noted that to date, four courses have been created so far, covering single-layer extrusion, extrusion materials, extrusion applications, and an introduction to ferrous metallurgy, with others (extrusion special process considerations, wire drawing dies, lubricants, and wire breaks) expected to be released in the near future. Individuals or companies interested in knowing more about the courses now available can contact Markowski at This email address is being protected from spambots. You need JavaScript enabled to view it..

LS Cable & System Ltd., South Korea’s largest cable manufacturer, announced that its subsidiary, LS Marine Solution Co. (LS Marine), has won a US$15.8 million contract to install submarine power cables for Taiwan Power Company’s (TPC) offshore wind power plant.

A press release said that LS Marine Solution will install the submarine cables for the TPC Offshore Wind Power Complex 2, a 294.5 MW project, by May 2026. The order represents the first overseas submarine power cable deal for LS Marine.

LS Marine Solution was established in 1995 as South Korea’s first dedicated submarine cable construction company. Formerly known as KT Submarine, it was acquired and rebranded by LS Cable & System in 2023.

LS Cable & System has previously supplied ultra-high-voltage submarine cables for Taiwan’s first phase offshore wind projects—including the one cited above—and the new contract is expected to create synergies between cable manufacturing and installation. The current project is part of the Taiwanese government’s long-term plan to develop 20.6 GW of offshore wind capacity by 2035.

“Based on our technology and experience accumulated as the first-generation submarine cable construction company in Korea, we have successfully taken our first step into the overseas power grid market,” said LS Marine Solution CEO Kim Byung-ok. “We will further expand our entry into the global market with this Taiwan project.”

The LS Group and LIG Group—both part of South Korea’s influential Pan-LG family of conglomerates— have signed a memorandum of understanding (MOU) to strengthen cooperation across defense, energy, and advanced technology sectors.

A press release said that the agreement, announced March 31, follows a high-profile gathering of Pan-LG leaders at GS Group’s 20th anniversary, underscoring a renewed spirit of unity among the country’s leading business families.

Under the MoU, LS and LIG will collaborate on joint R&D, market analysis, technology and personnel exchanges, and may establish joint ventures to leverage each group’s core strengths. The LS Group, known for its focus on electrics, materials and energy, will bring expertise from subsidiaries such as LS Cable & System and LS Mtron. The LIG Group, whose portfolio includes defense equipment and IT services, is expected to integrate LS’s material and cable technologies into its flagship defense unit, LIG Nex1, which specializes in advanced weapon and command systems.

A joint consultative body will be formed to define detailed cooperation plans and set an execution timeline. The partnership is widely viewed as a strategic move, especially as LS Group faces heightened competition and legal disputes in the cable sector. Recently, Hoban Group, parent of rival Taihan Cable & Solution, acquired a 3% stake in LS Corp., fueling speculation about its intentions amid an ongoing patent and technology theft dispute between Taihan and LS Cable & System.

More than a year after an expected production order, the Great Sea Interconnector—a project to link the electricity grids of Greece, Cyprus, and Israel—has seen little progress as it deals with unresolved financial arrangements and deposit guarantees, casting uncertainty over its future viability.

A recent article in Vima, a Greek newspaper, spelled out the problems encountered by the project that trace back to mid-2023 when the original developer sought a financing increase to €1.9 billion from Greek and Cypriot regulators due to cost overruns. Although a long-delayed contract with French cable manufacturer Nexans was signed for the Crete-Cyprus segment, EuroAsia Interconnector soon declared it could not make the required advance payment, further jeopardizing progress.

To prevent collapse, the Greek and Cypriot governments intervened, asking Greece’s Independent Power Transmission Operator (IPTO) to assume responsibility for the project. The European Commission endorsed this move, expressing confidence in IPTO’s ability to deliver. By October 2023, IPTO was officially in charge, and the project-renamed the Great Sea Interconnector-finally entered the implementation phase after thirteen years of planning.

Despite this momentum, significant challenges persisted through 2024. Construction of the first phase began in December 2023, with Nexans instructed to secure production slots and initiate procedures. However, in July 2024, the Cyprus Energy Regulatory Authority issued a ruling that upended the project’s financial framework by rejecting recognition of a reasonable return, revenue, or cost recovery during construction. This decision severely undermined the project’s economic viability.

Compounding the situation, the Cypriot government did not fulfill its commitment to acquire a stake in the project, despite earlier assurances that a decision would be made by January 2024. After months of negotiations, Greece and Cyprus signed a bilateral

agreement in September 2024 to accelerate the project, overturning the July regulatory decisions and providing a more sustainable foundation for development.

Japan’s NTT World Engineering Marine Corp. (NTT WE Marine), the submarine cable laying subsidiary of Nippon Telegraph and Telephone Corp. (NTT), has launched a new CLV that is registered under the Philippine flag and operated primarily by Filipino crew members.

A press release said that NTT WE Marine, marking its 25th year in the Philippines, launched the CS VEGA II, a state-of-the-art cable-laying vessel. NTT notes that it is the only cable provider that has a fully equipped, Philippine-flagged cable-laying vessel.

The new CLV, is primarily intended to be operated for the maintenance of domestic submarine telecommunications cables within the Philippines, as well as international submarine telecommunications cables in nearby waters. It joins a fleet that includes four other CVLs: Vega, Orion, Subaru and Kizuna. The vessels are used for a range of tasks including submarine cable installation, maintenance, ocean investigation, construction, repair work and marine surveys.

NTT WE Marine is a key participant in the Philippine Domestic Submarine Cable Network (PDSCN), a 2,500-km initiative led by Eastern Communications, Globe Telecom and InfiniVAN, aimed at improving connectivity in underserved regions. It also will be a maintenance supplier for PDSCN, which was said to be in its final project stages. The

network’s subsea (wet) segments were finished as scheduled in 2023, and about 90% of its 33 planned cable landing stations have been constructed. The remaining landing stations and some inland facility connections are expected to be completed within this year.

NTT WE Marine President & CEO Mamoru Watanabe said that the Philippines project has a pivotal telecom role. He also cited global security concerns and the need for stable communications infrastructure as key drivers for the expansion. “Economic development’s foundation is communication. There’s a lot of opportunity in the Philippines, especially now that global security is unstable,” he said.

Earlier this year, Adani Group, one of India’s largest and fastest-growing cement manufacturers, announced plans to enter the wires and cables industry through a newly formed joint venture.

On March 19, 2025, Adani Enterprises, via its wholly owned subsidiary Kutch Copper Limited, finalized the incorporation of Praneetha Ecocables Limited in partnership with Praneetha Ventures Private Limited. The joint venture will focus on the manufacturing,

marketing, and distribution of metal products, cables and wires, marking a significant diversification for the conglomerate.

A company statement said that the initiative is part of Adani’s broader strategy to strengthen its presence across the infrastructure and construction value chain. By leveraging the group’s extensive experience in large-scale manufacturing and its ongoing investment in India’s largest greenfield copper refinery in Gujarat, Adani aims to secure reliable raw material supply and competitive pricing for its cable business. The company expects this vertical integration to provide a unique advantage as it enters a market that has seen a compound annual growth rate of over 13% in recent years.

The new venture will target key sectors such as residential, commercial, infrastructure and industrial applications, reflecting the rising demand for high-quality cables and wires driven by India’s urbanization, smart city projects, and renewable energy expansion.

Adani Group’s leadership emphasized that this entry aligns with its long-term vision to be a leading provider of integrated solutions for India’s rapidly growing construction and infrastructure sectors. The company’s board has approved the plan, signaling its intention to diversify its portfolio and capitalize on synergies with its existing copper and infrastructure businesses.

M. Huber Corporation announced that it has acquired the alumina trihydrate (ATH), antimony-free flame retardant and molybdate-based smoke suppressant assets of The R.J. Marshall Company.

A press release said that the deal will see the acquired assets incorporated into the Huber Advanced Materials (HAM) strategic business unit of Huber Engineered Materials, an operating company of J.M. Huber Corporation. These assets will enhance HAM’s product portfolio and strengthen its position as a leader in the North American market of flame retardant and smoke suppressant technologies.

The acquisition includes R.J. Marshall’s alumina trihydrate and Marshall additive technologies product lines (excluding those containing antimony trioxide). HAM will integrate these products into its existing portfolio, providing customers with a seamless transition and continued access to the materials they rely on. “This acquisition underlines HAM’s strategic commitment to grow our halogen-free fire retardant and smoke suppressant portfolio and expand our product offering for our customers,” said HAM Global Vice President Sales & Marketing Martin Schulting.

HAM, known for its focus on sustainability and innovation in specialty additives, continues to invest in expanding its environmentally responsible product range. The company has recently achieved significant milestones in life cycle analysis and is recognized for advancing halogen-free solutions for industrial applications.

Earlier this year, UltraTech Cement, a significant India cement manufacturer, announced that it plans to venture into the wire and cable industry with an investment of approximately $216 million over the next two years.

A press release said that the decision, announced at the company’s Feb. 22 board meeting, calls for the initiative to begin production by December 2026 at a manufacturing facility set to be established in Bharuch, Gujarat. “UltraTech proposes to leverage its extensive manufacturing expertise coupled with its connection with the end-customers to deliver high-quality wires and cables thereby targeting a higher share of the customer’s wallet.”

The company will focus on making wire and cable for sectors such as residential, commercial, infrastructure and industrial applications. Per the release, India’s wire and cable industry has seen CAGR revenue of 13% from 2019 to 2022. “With the migration from the unorganized to the organized market, the outlook continues to remain robust which provides an attractive opportunity for a new trusted player in the sector.”

Company Chairman Kumar Mangalam Birla said that the plan will expand the company’s presence within the construction value chain. The foray into wire and cable “aligns with our vision of providing comprehensive solutions to our end customers in the construction sector.” He emphasized that this move supports UltraTech’s long-term growth strategy and market leadership ambitions.

UltraTech’s board has approved the plan, signaling the company’s intention to diversify its portfolio and strengthen its position as a leading provider of building solutions. The company will leverage its expertise in manufacturing and its strong customer connections to deliver high-quality wires and cables.

Per its website, UltraTech Cement Limited is the cement flagship company of the Aditya Birla Group. It is the largest manufacturer of grey cement and ready-mix concrete (RMC) and one of the largest manufacturers of white cement in India. It is the only cement company globally (outside of China) to have 175+ MTPA of cement manufacturing capacity in a single country. It operates in 40+ countries across six continents, and more than half its revenues come from operations outside India.

R&L Spring Company™, a manufacturer of springs, coils and wire forms, has opened its third facility in Wisconsin, this one in Elkhorn, that adds 50,000 q ft of capacity.

“R&L Spring has continued to expand and grow our business, and the opening of this 3rd facility allows us to support our growth in both the short term, as well as set the stage for planned growth initiatives over the coming years,” company President Julie Arenz said in a press release.

R&L Spring has two manufacturing facilities in Lake Geneva, Wisconsin, with 220,000 sq ft of capacity that also supports its Medicoil™ division that began serving the medical device market in 1992. It was formed to address the unique requirements of the medical device market and evolved into a leader in manufacturing micro-precision coil and wired formed products for the medical device industry.

The family owned and operated company has 53 years of precision, winding, coiling and wire forming experience. R&L Spring Company custom manufactures springs, coils, and wire forms for a wide range of OEM’s in powersports, automotive, medical device, as well as other general industries markets.