Wirenet Image Band
wirenet.org mobile image band
  1. Forum
  3. Technical Divisions
  5. Supplies and Equipment
  7. Plastic wire ties
× Have a question on lubricants, wire drawing, quality, testing, ISO, environmental? Post your question here to get the answer!

Plastic wire ties

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 1 week ago #2209 by Archived Forum Admin
Plastic wire ties was created by Archived Forum Admin
I am looking for a supplier for the wire tie that fits through a hole in the reel flange to secure the end of the wire conductor.
Any suggestions?
Thanks

Please Log in to join the conversation.

  • Archived Forum Admin
  • Archived Forum Admin's Avatar Topic Author
  • Offline
  • Platnium Boarder
  • Platnium Boarder
More
12 years 1 week ago #2210 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Plastic wire ties
Hello again wirenut4sure,

Could you please describe these plastic wire ties in more detail? How do they connect to the reel? Adhesive? How do they connect to the wire? Spring Clip? Presumably the wire does not make it through the hole on the reel flange but how is that guaranteed and how does the wire stay tightly wound?

Thank you,

Regards,
Peter J. Stewart-Hay P. Eng.
Principal
Stewart-Hay Associates
www.Stewart-Hay.com

Please Log in to join the conversation.

More
11 years 10 months ago #2495 by David Ferraro
Replied by David Ferraro on topic Re: Plastic wire ties
See if this is what you need

carris.com/product/35/wire-ties

If it is - call Carris Reels Virginia 802 770 3641 and ask for Tammy

Please Log in to join the conversation.

Moderators: Erik A Macs, Peter J Stewart-Hay
  1. Forum
  3. Technical Divisions
  5. Supplies and Equipment
  7. Plastic wire ties
Time to create page: 0.099 seconds

Gallery

Contact us

The Wire Association Int.

71 Bradley Road, Suite 9

Madison, CT 06443-2662

P: (203) 453-2777