× Questions concerning iron and steel, steel making, rod rolling, galvanizing, springs, nails, fencing, and patenting go here.
rusting of 304 grade stainless steel wire
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
Less More
12 years 10 months ago #956 by Archived Forum Admin
rusting of 304 grade stainless steel wire was created by Archived Forum Admin
We are facing a problem, the stainless steel wire gets rusted.The diameter of wire 2.80mm bright skin passed
Can any one help to find the cause.
Thanks
Wire1
Can any one help to find the cause.
Thanks
Wire1
Please Log in to join the conversation.
- Archived Forum Admin
- Topic Author
- Offline
- Platnium Boarder
12 years 10 months ago #957 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: rusting of 304 grade stainless steel wire
Hello there,
(A) I suggest you read the following web page created by Atlas Steels Australia very carefully:
www.azom.com/details.asp?articleID=1177
(You may have iron contamination of the 304 stainless steel alloy. This is also known as embedded iron and leads to contamination rust staining. Go to the European Stainless Steel Development Association web site at www.euro-inox.org/ then follow this trail:
Select Area of Interest
Select Materials & Applications
Select The European Inox Materials and Application Series
Select Pickling and Passivating Stainless Steel
Select Download a PDF
Select View Immediately
You can read it right away and you can save a copy with your Adobe Acrobat Reader
(C) If you draw regular (non-stainless) steels on the same machine, make certain that the capstans are in very good shape (No grooving.), clean and that the drawing machine and drawing powders/ soaps are perfectly clean so that you are not contaminating (embedding) your own mild steel particles in the stainless steel wire.
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
(A) I suggest you read the following web page created by Atlas Steels Australia very carefully:
www.azom.com/details.asp?articleID=1177
(You may have iron contamination of the 304 stainless steel alloy. This is also known as embedded iron and leads to contamination rust staining. Go to the European Stainless Steel Development Association web site at www.euro-inox.org/ then follow this trail:
Select Area of Interest
Select Materials & Applications
Select The European Inox Materials and Application Series
Select Pickling and Passivating Stainless Steel
Select Download a PDF
Select View Immediately
You can read it right away and you can save a copy with your Adobe Acrobat Reader
(C) If you draw regular (non-stainless) steels on the same machine, make certain that the capstans are in very good shape (No grooving.), clean and that the drawing machine and drawing powders/ soaps are perfectly clean so that you are not contaminating (embedding) your own mild steel particles in the stainless steel wire.
Kindest regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
Moderators: Peter J Stewart-Hay, Eduardo Anaya, Peter M Power
Time to create page: 0.093 seconds