× If you have a question regarding coaxial, telephone, and building wire, power cable, insulation, extrusion, bunching, stranding, braiding, etc. post it here.
Enamelled Copper Wires
- Archived Forum Admin
-
Topic Author
- Offline
- Platnium Boarder
-
Less More
12 years 8 months ago #388 by Archived Forum Admin
Replied by Archived Forum Admin on topic Re: Enamelled Copper Wires
There are two very good magnet wire engineering specialists that monitor the Forums and answer questions. I have been in contact with one of them but he is extremely busy at the moment.
Sorry for the delay but please have patience. Thank you.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Sorry for the delay but please have patience. Thank you.
Regards,
Peter J. Stewart-Hay
Principal
Stewart-Hay Associates
www.Stewart-Hay.com
Please Log in to join the conversation.
- Rounak Kirtania
- Offline
- Fresh Boarder
-
Less More
- Posts: 1
- Thank you received: 0
3 years 3 months ago #3162 by Rounak Kirtania
Replied by Rounak Kirtania on topic Enamelled Copper Wires
The answer to the question requires thorough research. But as per my opinion, the first one will produce better curing.
You can check our website for wiring solutions:
gadglobal.co.in/
You can check our website for wiring solutions:
gadglobal.co.in/
Please Log in to join the conversation.
- PhD amir amir kha, PhD
- Offline
- Fresh Boarder
-
Less More
- Posts: 4
- Thank you received: 0
2 years 11 months ago #3184 by PhD amir amir kha, PhD
Replied by PhD amir amir kha, PhD on topic Enamelled Copper Wires
:hi i am producer.I am in a very small city in Iran. I am a young entrepreneur. I have a question for you. We are in the production of wires and cables. When we produce wires, our wires around the conductor are not uniformly covered. In fact, the covering of the wires is non-uniform and wavy. It can be whether the vibration of the wire can cause it
Can you tell me the temperature range of the preheaters? In addition, I have researched that I should use a preheater to solve the problem of copper conductive adhesion and silicone coating. I want to know what temperature range preheaters have and what temperature is better to use to increase adhesion
Thank you for your help, you have provided me with very good solutions and great help
Can you tell me the temperature range of the preheaters? In addition, I have researched that I should use a preheater to solve the problem of copper conductive adhesion and silicone coating. I want to know what temperature range preheaters have and what temperature is better to use to increase adhesion
Thank you for your help, you have provided me with very good solutions and great help
Please Log in to join the conversation.
- PhD amir amir kha, PhD
- Offline
- Fresh Boarder
-
Less More
- Posts: 4
- Thank you received: 0
2 years 11 months ago #3185 by PhD amir amir kha, PhD
Replied by PhD amir amir kha, PhD on topic Enamelled Copper Wires
hi i am producer.I am in a very small city in Iran. I am a young entrepreneur. I have a question for you. We are in the production of wires and cables. When we produce wires, our wires around the conductor are not uniformly covered. In fact, the covering of the wires is non-uniform and wavy. It can be whether the vibration of the wire can cause it
Can you tell me the temperature range of the preheaters? In addition, I have researched that I should use a preheater to solve the problem of copper conductive adhesion and silicone coating. I want to know what temperature range preheaters have and what temperature is better to use to increase adhesion
Thank you for your help, you have provided me with very good solutions and great help
Can you tell me the temperature range of the preheaters? In addition, I have researched that I should use a preheater to solve the problem of copper conductive adhesion and silicone coating. I want to know what temperature range preheaters have and what temperature is better to use to increase adhesion
Thank you for your help, you have provided me with very good solutions and great help
Please Log in to join the conversation.
Moderators: Erik A Macs, Peter J Stewart-Hay
Time to create page: 0.071 seconds